Kawasaki VN750 Vulcan VN 750 Exhaust Emission Reed Plate AIS Smog Block Off Kit

Description

VN 750 Vulcan AIS Block off Plate
N
Fitment for years 1986-2006
1 KIT IS FOR THE ENTIRE BIKE.
---
Replaces air pumps, air valves, and associated hoses with 2 or 4 small aluminum plates, made 6061 Aircraft grade Aluminum.
Benefits
Eliminates Backfiring
Removes Engine Clutter
Reduces Weight
Lower
EGT's
out (exhaust gas temperatures)
Kit Includes
Aluminum Block Off Plates Specific to your Bike
Lock Washers
AIS Defined
The manufacturer uses clean air injection that adds oxygen to the exhaust.
For this to work correctly, the entire system must remain stock, meaning no intake or exhaust modifications or aftermarket parts. Once changes have been made, the system is no longer in an equilibrium, so it often leads to "backfiring".
Possible backfire could damage the
exhaust system of the bike.
By removing the entire system, and replacing with plates, one can nearly eliminate all backfiring, even if no modifications have been made.
Also, since the clear air injection is adding extra air from the air box you can gain some increase in air box pressure when at speed.
With the clean air system in place, any air/fuel sensors on the bike will show a leaner running engine causing your bike to adjust the fuel system too rich.
This can only be prevented by eliminating the clean air system (AIS) and all associated hoses. This also cleans up the look of the bike and removes a significant amount of weight.
Shipping
Domestic orders will ship in 1-3 days and take about a week to receive from the date payment is made.
International orders ship in 1-3 days and take
at least
2 weeks to receive from the date payment is made.
FAQ'S
Q:
Is this kit for all (1,2,3,4,6) valves on my bike?
A:  Yes,  1 Kit is for all the valves on the bike. You only need to order 1 Kit for your bike.
Q:
Do you ship international, and how much?
A: Yes, we ship worldwide, for .42.
Q:
What size plates come in this kit?
A:  Each kit is different, based on the bike, modifications, and operating altitude, so jet sizes vary.
Q:
Do I need an AIS Block Off Kit?
A: If you have made any modifications, or want reduce backfiring, remove weight, Clean up the engine clutter,
then yes you do need a kit.
Q:
How long does it take to install?
A: Time varies, but it is directly related to the # of valves on your bike. Allow at least 1/2 hour per valve.